I use Comaps, but all the open source map apps are using OpenStreetMaps on the backend. OpenStreetMaps varies from way better to way worse than google maps depending on where you are, but can be manually improved by anyone willing to take the time!

I seem to have minor compatibility issues with most controllers on my EndeavourOS PC, but it seems to vary more with the games than with the different controller brands themselves. Seconding 8BitDo being pretty tough though.

Now the real question is, has anyone designed an open source controller (not fightstick/hitbox), that is purchasable? Like Ploopy or Tindie or something?

Oooh, that’s exciting AND timely, given the Google shenanigans lately.

If you were to go with fish, I think there are other species that are somewhat less environmentally destructive to eat. It’s been a while since I looked but it might’ve been like:

farmed oysters < sardines < herring < etc (from best to worst)

Something like that anyway. Not sure quite how trustworthy it is, but try Seafood Watch for recommendations. Also, small oily fish are incidentally better for you than the big popular ones anyway. Lemmy has a !tinnedseafood@lemmy.world community if you’re unsure what to do culinarily with that sort of fish, might not be that populated though.

Also also, not sure if this is more or less practical since it kinda sounds like you maybe don’t have a lot of choice in your food options, but: seaweed! It’s delicious, vegetarian, and got most of the same crucial nutrients as small oily fish. That’s where they get it from themselves, actually. You can even get culinary oil pressed from seaweed with (hopefully) the same benefits. Personally I keep an assortment of varieties of seaweed fron Maine Coast Sea Vegetables in my pantry and just put them in everything, adds a lot of umami to vegetarian food.

Feel free to disregard any of these brands or w/e, they’re just the ones I use, but obviously never trust a corporation as we all know lol

I’ve never tried without an enclosure, because it smells way more poisonous than the internet says it is. Hard to imagine it being any harder to print than it already is though, I’d imagine it’s fine

It’s not too hard to remove from the bed. It will, however, become one with the print itself lol

Polypropylene, hands down. Most plastic thingies that’re meant to bend constantly without wearing out are PP. Like those little straw caps attached to big drink tumblers? The bendy part, if not the whole hinge, is usually PP i think. I think generally things that could be described as “living hinges”.

I will say though, that it’s easily the most difficult filament I’ve ever had the displeasure of printing. It absolutely REFUSES to stick to literally anything but other polypropylene lol. What you do is just put some packing tape on your bed, that stuff’s made of PP as well.

If I had that amount for a printer, I’d get an LDO Delta Flyer kit or an LDO BabyBelt Pro kit. Maybe even 2! They’re pretty cheap last i checked

Oooh that’s cleverrr… Great job! Definitely coulda used this technique a few times in the past if I’d ever thought of it

Whoaa cool!!

Pretty sure you’ve misread. That was not a quote of what they said, it was a suggestion of what they should say.

A Drawfee reference, in my Lemmy?? It’s more likely than you’d think

Actually, do we have a Drawfee community here? That’d be nice

Whoa, a pepper mead? That sounds amazing

I’m really hopeful too! If mobile banking/mobile pay are the only sticking points, I’ll be completely happy to abandon those! The mobile Linux stuff is all super enticing, the only thing that’s held me back is how the GOS team keeps saying they’re not secure enough yet for daily driving

I doubt this is it, but it kinda looks like what happens when your slicer has arc welder turned on, but your printer firmware does not. You get a bunch of unrecognized G2/G3 commands flying by in the console, and curves get weirdddddd looking

That’s super lucky for me at least… Hopefully the alternatives to Google and Apple survive all this

If they don’t get stopped, how long might I be able to last on an old-ish GrapheneOS Pixel? I really didn’t wanna replace it soon, and the open hardware stuff out there is a bit too expensive for me right now. Like, it should keep at least working right? Are fdroid/obtainium/etc all gonna close up shop instantly? I don’t really need Play store for anything at all, if that’s all that goes down

It’s always so hard to tell lol. I just know a similar thing helped for a similar problem on my Voron 2.4

You say this happened before on a previous nozzle, was it also a 0.2mm? Try cranking your max volumetric flow way down and see if that helps

Oh geez! Well I guess I can’t be to mad at what my instance (Pxlmo) is doing, because at least its not doing that! What instance are you on?